Effective 1 April 2019, a number of initiatives proposed under the NSW Water Reforms come in effect. These are:
- Licence holders no longer need to get authorisation from WaterNSW if their metering equipment is not working. Licence holders can now self-report when metering equipment is not working via the online form. Licence holder have 24 hours to self-report once they become aware that their metering equipment is not working.
- Surface Water (regulated and unregulated) Licence holders can apply to have their works made inactive. If the works are made inactive, Licence holders will not be required to comply with the new metering regulations. However once made inactive any unregulated licence will be billed on a one part tariff.
皇冠代理Read more information on the .
Water meters are the key tool for measurement and monitoring of water usage in NSW. Accurate metering is essential for fairness and equity of water sharing between users. Licence holders should check their works approval to ensure their site is compliant with current metering conditions.
The type of meter you are required to have will be determined by your works approval.
皇冠代理Please refer to the Department of Industry’s dedicated webpage on about the new metering regulations.
皇冠代理For further information on current pattern approved meters The Murray–Darling Basin Authority (MDBA) website has published a list of .
皇冠代理If you need to install a new or replacement meter after 1 April 2019 you must comply with the new standards for more information on these standards please read the NSW Non Urban Water Metering Policy –
To keep existing meters please click on the link for information on the standards that need to comply NSW non-urban water metering policy –
Please use the to help you understand your responsibilities under the NSW non-urban water metering framework.
has a list of certified meter installers and validators that can be found under the ‘Certification’ tab on their website. Irrigation Australia also offers courses to become a certified installer and validator.
As at 1 April 2019 the process for reporting faulty metering equipment has changed. Licence holders can now self report If their metering equipment has stopped working. There is no need to stop pumping. Licence holders have up to 24 hours (from the time they are aware that their metering equipment is faulty) to complete the online self reporting form. Licence holders do not need authorisation from WaterNSW, however licence holders will need to provide the relevant information as required by the new legislation. Failure to self report within 24 hours is a breach of the Water Management Act 2000 and will be referred to the (NRAR). Licence holders will need to specify how the water extracted will be measured whilst the metering equipment is faulty.
皇冠代理WaterNSW will provide a receipt of confirmation for self reporting to the licence holder containing the log book that should be used to record water take during the time the metering equipment is faulty. WaterNSW may contact the licence holder to clarify the method that will be used to record the water extracted if necessary.
Licence holders will have up to 21 days to get the metering equipment repaired or replaced. Any repairs to or replacement of metering equipment need to be certified by a Duly Qualified person before the meter can be used. A list of duly qualified persons can be found at
If the metering equipment cannot be repaired or replaced within 21 days of reporting of the faulty metering equipment, the licence holder must apply for an extension of up to 21 days from WaterNSW stating the reason for the extension. WaterNSW has the right to refuse any extension/s.
If you need to install a new or replacement meter after 1 April 2019 you must comply with the new standards, for more information read the NSW Non Urban Water Metering Policy -
To keep existing meters please read the information around the standards that need to comply with the NSW non-urban water metering policy –
Once the metering equipment has been either repaired or replaced due to an S91i the Licence holder needs to advise WaterNSW via the S91i completion form皇冠代理. The licence holder has up to 28 days to submit the log book that has been used to record the water taken during the time the metering equipment has been faulty. A copy of the validation certificate completed by the Duly Qualified person confirming that the meter has been installed or repaired to the required specification andthat the meter does not exceed the maximum permissible error.
Licence holders will need to specify how the water extracted will be measured whilst the metering equipment is faulty and report this to WaterNSW on the log book provided.
For all regulated river licence holders a water order must be placed before water can be pumped. Any water extracted via your pump, as determined by your meter reading, will need to be linked to a relevant water order. Visit water ordering皇冠代理 for more information.
Meters installed by WaterNSW as part of the NSW metering scheme are state-owned and will incur a metering service charge皇冠代理 to cover the cost of operation and maintenance in accordance with the national metering standards.
Charges vary depending on the size and type of meter installed. Regulated river prices are set by the Australian Competition and Consumer Commission (ACCC). Prices for unregulated and groundwater charges are set by the Independent Pricing and Regulatory Tribunal (IPART).
- If you have a concern about the accuracy of your new meter, please call the WaterNSW helpdesk in the first instance on 1300 662 077 or your local customer field officer.
- If you elect to have your meter tested, a deposit is payable prior to testing.
- The deposit will be refunded in full should your meter prove to be inaccurate.